Based on our successful Prorunner mk10 pallet lift the loaded Pallet Stacker is a very versatile unit to stack loaded pallets on top of each other.
Based on our successful Prorunner mk10 pallet lift the loaded Pallet Stacker is a very versatile unit to stack loaded pallets on top of each other. Stacking loaded pallets is very common in logistic operations to limit the number of fork lift movements or to use within an automated truck loading system. When using a pallet doubler the logistics handling is lowered significantly and transportation cost can be lowered.
The Prorunner mk10-PS is a rugged pallet stacker that will stack your loaded pallets, until the end of time. That is, it does what it is supposed to do and looks after itself. The Prorunner mk10-PS is the perfect solution for capacities of up to 60 pallets per hour. Because of its extremely small footprint, this loaded pallet stacker fits into virtually any layout. This compact unit is very easy to integrate into your transport system and can be equipped with roller conveyor or chain conveyor. Thanks to its design and highly reliable components, the machine hardly requires any maintenance. In short: an easy-to-integrate pallet doubler that remains affordable.
- Minimal footprint
- Infeed / discharge to all sides
- Suitable for vertical sorting (multiple floors)
- Pallets, racks, etc. up to 2000 kg
- Sturdy, low maintenance machine
- Solid steel construction
- Standard equipped with drop-down safety
|Specifications||Standard||Optional up to|
|Transport height (mm)||500||400 min. / 1.000 max.|
|Stacking height (mm)||2.000||3.000|
|Product (Lxw in mm)||1200 x 800||1200 x 1200|
The Prorunner mk10-PS does its job in almost any conceivable situation. Not only is the productlift suitable for left or right side product infeed or outfeed, when using a suitable product carrier also via the front.
For selecting the configuration that suits your situation best, you simply follow the roadmap in which the various possibilities are clearly compared next to one another. By means of the adjacent drawing you select the required in- and outfeed situation. You can find the accompanying 3D drawing by means of the table below.
You want to lift (elevate) products, infeed at the left side and outfeed via the front side. In that case you select combination A2. If you want to lower the product (descend) and infeed and outfeed at the right side, then selection combination 7G